Stretch Ceilings

Stretch ceilings are made of special vinyl film that is stretched on a plastic frame. This frame may be visible or hidden. There are many types of performance outside of the stretch ceilings, such as suede or imitation marble, lacquered or matte, as well as a variety of colors. Plus, the ceilings have many advantages, here are a few: – If the ceilings contaminated, they easily wash off with plain water – for long term use such ceilings are not cracked or damaged from shock – Stretch ceilings are very thermally stable, they retain their excellent properties at temperatures -5 to 50 degrees – Because the ceilings are made of special vinyl, they meet all international standards for fire safety in fire they do not burn and do not melt – If there is leakage in the ceilings, then ceilings stand about 100 liters of water per 1 square meter. And after you remove the vinyl itself restores water tension.

Water is removed very easily, it is enough to open a hole for the lamp, but if the built-in ceiling lamps are not available, then you need to call a specialist with the firm that you mounted the ceiling, coming just a specialist otognet one corner and will merge the water, then set the angle back – Thanks to the plasticity vinyl, ceilings can be installed in absolutely all areas in different planes, to make different slopes, in general, anything that pleases you – Plus manufacturers, such ceilings give ten-year warranty. How is the mounting tension ceilings? Quite simply, workers measure the space in which to mount the ceilings, then made to get the size of a vinyl film with the frame. Once you are ready to be mounted on the perimeter of a room attached plastic frame, which will attach itself Vinyl. The frame is fixed at 5 cm below the main ceiling. Next Vinyl film is attached to the frame at the corners, with special clips. After that, the room is heated by means of special equipment.

When the room was warmed begins assembling the ceiling. After mounting the film in a room air slowly cools, and the film tension ceiling stretched itself. The width of a vinyl film is usually equal to 1.4 m, so there will be joints, welded joints but these, as will be seen by only a very thin line on the spot connections, and if the matte film has been used, this joint is generally not noticeable. Because the ceilings have good fire resistance they can mount any lights with incandescent lamps 60 W and halogen lamps up to 35W. Lamps themselves are fixed to the main ceiling, stretch ceilings in a light-drilled holes, which pass through the ring. That is why the ceilings are the most inexpensive, beautiful scenery and convenient method of any premises.

Laying Solid Porcelain Steps

At that stage, and how to lay granite? The optimal material for paving granite steps in the ratio of price and quality – in excellent adhesive showed plitochnyy'Yunis granite. "What can be cut granite steps? Cutting of granite steps, based on feedback from builders has proved popular diamond blade for cutting the water company Distar (Russia). The cost to drive construction market in the middle 1350-1400rub/sht. The thickness of the disk must be 1.5-1.6mm, no more! If the size of which is cast of solid concrete stairs do not match the size of a monolithic cladding granite steps, then you should not start packing stage to an increased layer of glue, is very much can drive up the stairs, the budget cost of the material and work on its lining. Simply put lightweight formwork plywood and fill your stage expanded clay-concrete made immediately at the site of the expanded clay medium fractions, sand and tsementa.Vy get the ladder without the overhead and podognanuyu to your size. The cost of expanded clay is not so great for Compared with even and not expensive (prices stroy.rynkah = 360rub/meshok) Eunice Granite glue. The base surface of the concrete staircase at the further stages of granite cladding obezatelno primed before lining.

Usually use an acrylic primer deep proniknoveniya.Srednyaya value 10l jerry cans for all the construction markets of Moscow and the region 240-260rubley. Laying stage begins always 'top down'. Before the stage and side part of the stage risers are nominated for the thickness of the steps (20mm). Side risers cut for podlitso with concrete part, which is then plastered, and painted in shpatlyuetsya color of the walls. For cutting granite levels of use vodoreznoy stanok.Optimalnym version of the machine can be considered KORVET.Sootnoshenie price-power-quality is high. Vodoreznoy machines do not leave chips and if you cut off level to further its connections with the other piece, then this machine you just neobhodim.Pravda when you need to cut only one side of the adjacent wall, you can use a regular grinder with a turbo-drive to cut concrete. Consumption and the amount of tile adhesive to the lining of your ladder can proschitatpp in onlay mode going to the website of Eunice. WARNING! If you need to handle the edge of the granite steps and rounded side moldings (the tiles are cut from the background that goes to the site), all this can be done using a special abrasive skin of stone KX-370. Supplier of abrasives in Moscow firm "Liner Belt '. See and read them products can be here: All the information you are given on the basis of calculations and the experience of finishing construction of monolithic stairs.

Prefabricated Buildings

Prefabricated buildings – is framed or frameless building design features which make it possible to build them, regardless of climatic conditions. Most pre-fabricated buildings constructed with the use of metal frame, the walls are made either by permanent form, or assemble a sandwich panel, often also use the technology of sheet assembly. Prefabricated modular buildings very quickly conquered the market, many reasons for this, and one of the biggest – is the absence of TN. "Wet" processes. Construction of prefabricated buildings is at any time of year: the walls and roof are assembled by welding or bolting compounds.

This greatly reduces the time of erection of a building, reduces the load on the metal frame and the foundation, reduces the cost of construction. Prefabricated buildings on the bolted joints can make out, if necessary and move to another place, and one-story small area of the building technology can be installed on site without a foundation. Prefabricated buildings are divided into two main types: buildings based on steel and light frame construction (BVZ based MC and LMC). Prefabricated modular and prefabricated buildings prefabricated buildings prefabricated assembled at the construction site, and the technology provides for domestic and exterior finish that makes it possible to implement any architectural decisions. Basically with this technology erect warehouses, hangars, industrial buildings, shopping centers and halls, sports complexes and even homes. Modular prefabricated buildings are assembled from ready-made standard modules.

The standard module has a size of 6×2, 5 meters and a height of 2 to 2.5 meters. Most of the modules of erecting 1 – and 2-storey building. This kind of structures do not differ in its original architecture, as they are intended to solve practical problems. Thus, the modules built by a small mobile offices, administration buildings, shift camps (where includes dormitories, dining rooms, bath and laundry facilities, clinics, shops) Market-fabricated buildings. History Efficiency Construction of prefabricated buildings on the basis of metal structures made it possible spread this technology around the world.

Personalized Business Gifts

Personalization business gifts in recent years is particularly important exclusivity and individuality of each gift. After all, what he was original and interesting, the more likely that you will show yourself as a creative company, in paying attention to every detail. Today, there are many different ways to personalize gifts and drawing logos on souvenirs. First of all, stamping, or drawing of the logo on paper, cardboard, leather or imitation leather. Embossing – a reliable and economical way of decoration, which adds originality to any product: business cards, postcards, covers of catalogs and brochures, folders for papers, books or diary. Drawing images is pressure by metal or plastic plate on the material when heated. To place advertising or corporate gift, made of soft materials (leather, paper) can be chosen termotisnenie (hot stamping) blind embossing, foil stamping, embossing.

Blind embossing – embossing to obtain in-depth "bare" cliche. In this case the image is a colorless, as if pressed into the material. This type of embossing is applied to obtain an imprint on the bindings, leather or leatherette. Stamping foil color – the transfer of the product layer of color printing foil. Due to the large selection of colors, you can create high-impact colorful image for the covers, business cards, etc.

Stamping – getting relief image on business cards, books, postcards, diaries and other similar products. Damage by stamping company logo will look pretty original. Apply branding or logo on products of metal or glass by using laser engraving. This method of marking a laser beam, forcing evaporate from the surface of solid particles of the subject. Laser engraving is ideal for processing metal gift pens, key rings, business card holders, clocks, etc. Silkscreen or screen printing – method obtaining images by forcing ink through a special form (template). This method is applied to paper, plastic, film, fabric, metal, glass, ceramics, etc. Screenprinting has a low cost, while allowing to apply unique decorative plaques of all shapes and colors. Screenprinting can be used in the manufacture of business cards, envelopes, letterheads, banners, etc. Tampo – the kind of deep Printing in which the image transfer from the printing plate (cliche) to the printed surface of the product is not the right way, and with a swab (with a soft silicone pad). This method is used in labeling small objects: pens, lighters, ashtrays, mugs, lighters, key chains, etc. Or decal transfer printing – another type of printing, in which the first printed decal, which was subsequently transferred to the decorated product. There are several types of decals: Decals cold, low-temperature decal (for decoration of glass and metal) and firing (hot) decal, applied for registration of products porcelain, ceramic and glass. Thermal Transfer – a relatively new form of printing in which the image is first cut on the material (mostly film), then dye it with is transferred to the product under the influence of temperature special press. With this technology you can decorate the bags, briefcases, umbrellas, etc. Also, there are several technologies that allow for more effects in the design. These include thermography, with you can use to create the effect of three-dimensional image on a flat surface. Prospect, the image can be as colorless and colored. In addition to thermography applied polymer fill, which is used to production volume labels (Schild), badges, key chains and other souvenirs.

3D Films

Free movies made in 2010, and more often be accompanied by 3D (three dimensional) image. To order the person saw things he found themselves before the bulk, every eye in the brain makes them different perspectives. Viewing these films are most often done in cinema, that view 3D movie building will not spend a small bag of equipment (goggles, and it is likely a special monitor.) The cheapest method view of the latest such movies in the economic development criteria anaglyph (glasses with colored filters – the approximate cost of the equipment 350rubley) acts with at least monitor what, in the absence of glasses will look picture forked. Next frequent at this day slide design (120 – gertsovoy monitor, stereo shutter glasses sync to the monitor via infrared – the transmitter – the approximate cost of the equipment 20-thousand. Ruble) set has the ability to restrict rather expensive, although the picture looks fantastic 3D (in the second sees 60 images for 1 and 60 eyes slightly shifted to another). Another view of such a technique in family movies criteria for the development of polarization – the individual images for the left eye and right eye-shaped manner suitable polarization images (monitor, polarized glasses – the approximate cost of equipment 15 rubles.). You probably are interested in possibly find where voprosets 3D films, no matter what closer adopted the usual 3D Vlu-rau, discs with three-dimensional image data on the media is still too little. But there are also other ability.

Such as for example the web (on YouTube uploaded videos in small 3D), it is possible to make a further search those movies on search engines (and so Yandeks dalie). Also, it is possible to find 3D motion pictures and on DvD, the truth most of the of them exhibit only two-dimensional image, although the player RowerDvD 10 3D Ultra can add a stereo, and usually results in just such films. True 3D quality is not quite surprising. Three-dimensional technology has not yet won a movie industry, took up home computers.

Heating Systems in Russia

Installation of heating systems using heat pumps is to advanced energy-saving high-tech and in the future, be able to make a viable alternative to heating systems based on traditional energy sources in terms of scarcity and price rise. Heat pumps are widely and successfully used for the past dozen years, and their principle of operation is known for over 150 years. Having shown themselves to be reliable, highly efficient, environmentally friendly and safe technology devices, heat pumps have become in many countries an integral part of housing and communal services. On the efficiency of heat pumps in domestic it makes sense to talk in more detail. The thermal energy needed for heating homes, taken from the earth, where temperature is constant, but are not limited to the amount of heat. Electricity lost by heat pump is only required for Delivery of this heat into the house. Here, there is savings by reducing energy costs, maintenance and depreciation of heat pumps, the life of not less than 30 years. Heat pumps require only periodic inspection, while the main part of a costly installation of the external heat transfer, which is as long as there is a house.

No other heating equipment can not compete with heat pumps, it is for a period of just physically out of order. In this case the monthly cost of heating during the heating season after installing a heat pump in comparison, for example, with the option diesel fuel are reduced by almost five times! In Russia, the heating systems using heat pumps are still rare. It's not just contempt for the environment, their own security and the 'starry-eyed', through which we look at oil, gas and other traditional energy sources. Little information. Not even the heat pump itself, but of those who will be able to install them so that they work 'without problems'. A distinctive feature of the company, which is to be trusted is the use of technology and strict adherence to carry out work that meets applicable standards, rigorous quality control on the part of engineers and professionals trained in the European manufacturers of heat pumps and have adopted their experience in installation, real objects, confirming the professionalism and skills of workers. At installation of heating systems using heat pumps should be used only original materials and components, as a rule, reputable European brands.

Under ground probes must pass the full range of tests at the factory. All connections are made with the use of electric sockets, ensuring reliable and stable operation over the entire lifetime. After installing the probe into the borehole annulus is filled with a special solution that provides a tight and long lasting, physically stable pairing of the probe with the surrounding soil, and good heat transfer, prevent disruption of aquifers. In doing so, the company can not only implement the full range of activities and services to its clients: from the drafting of installation and delivery of equipment to ensure ongoing monitoring of the installed heating system, change the parameters and settings using the remote access – but also to diagnose the system already installed, consult as better use of them.

In Germany

But thermal and sound insulation properties of the metal poor. Warm aluminum system with thermal expensive compared with plastic frames with similar physical and technical parameters. Improves heat and sound insulation of aluminum window units with massive inserts made of wood. In residential aluminum frames are mainly used for glazing of loggias. Ecology? No problem At one time there was much talk about neekologichnosti plastics. Yes, in their production as catalyst used heavy metals, and in many sections of pvc in the manufacture of lead is added (to give a white).

But modern technology eliminates the emission of toxic substances finished product (unless it is not heated to the melting temperature, which is equivalent to a fire in the room): special passivating additives make the material environmentally impeccable. In addition, some profiles are now used instead of lead or zinc calcium. At all branded pvc frames are multinational and domestic hygiene certificates. It is better to keep the heat in the house, pvc windows allow to burn much less fuel. This not only saves money and natural resources, but also reduce oxygen consumption, reduction of harmful substances in the air.

In addition, during its existence plastic saved from cutting more than a dozen acres of forest, walking on the production of traditional wooden frames. In Germany, for example, the state allocates subsidies for even heating owners of plastic or other windows with sealed glass units. Plastic windows are used in the West for over 35 years. During this time, experts seen: plastic box – the most durable part of the house.

Fire Doors

To save lives in fires during the construction and repair facilities use fire steel door. Fire doors is one of the types of fire barriers and allow you to stop fire in buildings, this makes it possible to evacuate people and material assets and allows you to stop the fire. Fire barriers are of two types – local and general obstacles. Among the local fire barriers are: hatches, doors, gates, latches and other details, and the walls, floors, walls and roof are common fire designs. Local fire protection designs are paying much less attention, although they develop as active as the previous ones. Therefore, sometimes people design houses are not always correct. For this propose to consider in more detail fire steel door as an important element of technology security. Today, many manufacturers use the door hardware, doors, boxes and other items made of steel, it is the best material, fleeing from the fire.

Steel fire doors did not differ in the size of the timber doors. Also, many designers try to approximate the appearance of fire doors to the ordinary door. To place an appearance of use coverage, quality is sometimes so great that not every immediately realizes that the door was steel. In modern laboratories conducted many tests with simulation of regular fires. Most study two refractory opportunities are: 1. preserve the integrity of the door leaf when effects of different temperatures with different time intervals, that is, how long it will not fall out of the door frame 2.

Windows Servers

Perhaps you can not see the options issued to addresses in the Address Leases on the server, dhcp, and content Reservations may not be available after the restoration of the configuration dhcp gui of Windows Server 2003, Windows Server 2008. If you transfer or export the database via the dhcp mmc, migration is not Can. This problem occurs when you use the dhcp gui to move a dhcp database from Windows Server 2003 on Windows Server 2008. Solution during the export configuration in Windows 2003 Server, using netsh, you can see one of the following error messages: Access is denied An attempt was made to load a program with an incorrect format. In this case, the following steps will help export the database dhcp. 1.

On a Windows 2003 server dhcp, containing the original database, the command prompt, type the following command: netsh dhcp server dump> c: DHCPdump.txt 2. Copy DHCPdump.txt to another Windows 2003 server 3. Open Text file and edit it, using search and replace, change the IP-address of the old server to new Windows 2008 Server, and then save the file. 4. Stop the dhcp service server and delete the contents of the dhcp folder including subfolders.

5. Start the server dhcp. 6. Right- click on the command line cmd and then click Run as administrator to open a cmd prompt with elevated privileges. Note: You must have local administrator permissions to import the data. 7. In command prompt, type: netsh exec DHCPdump.txt 8. At the command prompt, type: netsh dhcp server initiate reconcile 9. Open the console and verify that the options are not damaged and the contents of Reservations present. 10. At the command prompt, type: netsh dhcp server export c: dhcp.txt all in some cases you can get the following error message when you import data for 2008 Server. 'The Requested operation requires Elevation.' Make sure that the command prompt opens with elevated privileges on Windows Server 2008. To do this, right-click on a command from the menu bar and select click Run as administrator, and then try and import data.

TechNet

Accordingly, in order to connect to a terminal server, each device, one way or another, accessing the server must be licensed, and licenses for versions of the device must be at least version installed on the terminal server. And another rule: In terminal mode can not operate all versions of office, to raise the mode terminals need Office Professional Plus, consequently, the version on the device should not be below the Office Professional Plus. Development tools. For development tools include the following applications: Visual Studio, msdn, TechNet. Unlike desktop applications, development tools licensed per user, that user must be fixed by order of the domestic enterprises, ie should be clearly stated in his order that a particular employee has the right to use this application. Appendix You can install any number of PCs and an unlimited number of copies, but to use the product can only be one user, followed by fixed license. And one important rule: the licensing of development, applications can only be used for the design, development and testing. , , .

Example: Assume development company has developed a program, for work that requires sql Server. If you take out of the development tools of sql Server and install on the client computer for the demonstration of this program, you thereby violate the license agreement. The internal order of the enterprise of securing user is required, otherwise the inspection bodies to prove that only the employee uses a specific application, it will be extremely difficult and one important aspect that must always remember: you have to study in detail the eula and pur.