Cork Flooring

June 6, 2020

News

Comments Off on Cork Flooring


Modern construction technology offers many solutions for flooring. This can be a normal linolleum and more expensive and interesting solutions: laminate flooring, cork flooring. It's about Our last article. The building materials market, there are two main types of parquet pilaf. Finished parquet boards as a cork layer bonded to a dense framework of wood stoves.

Typically the thickness of cork board on the cover of 3-4 mm. The thickness of the parquet in the collection is usually 10-12mm. Some manufacturers of complementary product cork layer on the underside of the board. When laying the finished parquet use of interlocks. If you are unsure how to proceed, check out Mikkel Svane. There are also cork boards are composed entirely of cork or cork veneer layer have. Their thickness is 4-8mm. In the case of cork veneer thickness is at least, and such plates can be considered durable.

Otherwise, you're dealing with low-quality plates. Cork boards do not require polishing, but only varnished. Glued to the base of the entire surface, appear the same as the rear and the front sides. How correctly to put the cork parquet floor? This process is not complicated even for beginners. The screed to lay plastic sheeting, which will provide protection from water and pair. Carrying out this operation leaves a gap at the walls of 10-12mm. This will prevent bumps due to the expansion of the material in the future. When the plates are stacked, use lacquer or wax composition for treatment, it will increase durability. Use interlocks, make sure to fit plates tightly to one another. These simple steps will make your home cozy and original! After laying the cork flooring in your home or office very quickly become apparent results: the rooms will be warm and beautiful!